The installation-friendly hammerset anchor for multiple fixings
The fischer nail anchor FNA II-H with hook and FNA II-OE with eye are made from zinc-plated steel. They are primarily suitable for the anchoring of wire and nonious hangers indoors. The European Technical Approval and classification as per fire resistance class R 120 ensure added safety. The FNA is set with a few hammer blows in a time-saving push-through installation. The FNA II expands automatically under load. The cone is pulled into the expansion clip and expands it against the drill hole.
The special active principle allows for a simple hammerset installation and, therefore, a short processing time.
The extremely short anchor depth prevents reinforcement hits, and creates the conditions for a trouble-free installation.
The optimised expansion clip ensures hold when placing in the drill hole, and prevents it falling out during overhead installations.
The massive shaft cross-section guarantees a high load-bearing capacity, thus offering an extremely high level of safety.
A range of head shapes allows for the fixing of wide-ranging fixtures, and for the ideal adaptation to suit the intended use.
Available Product Variants
Application and Permission
Fire protection plates
Fire protection boards
Wire and Nonius hangers
Substructures made of wood and metal
Concrete C12/15 to C50/60, cracked, for multiple fixings of non-structural applications
Also suitable for:
Solid sand-lime brick
Natural stone with dense structure
Prestressed hollow-core concrete slabs
* You can find detailed information on building materials in the registration document.
For Details see corresponding Documents
The FNA II with nail head is suitable for push-through installation. The FNA II M6 is suitable for pre-positioned and push-through installation. The FNA II OE and H are suitable for pre-positioned installation.
The installed FNA II nail anchor expands automatically under load. The cone is pulled into the expansion clip and expands it against the drill hole wall.
Available setting tools: FNA S-SBO to slip onto the drill, FNA S-SDS for series installation with a drilling hammer, FNA S-H for the manual installation of mounting rails.