fischer wall holder SPH 93

Name: fischer wall holder SPH 93
Brand: fischer

Variantes do produto

Download of image data

Top Features

Pi-shaped wall holder for high loads.
Use as sliding point.
Easy installation due to pre-drilled holes.

Art.-Nr. 092680
Thermostop CBS, BS

Wall holder as sliding point

Advantages

The wall holder is used to absorb and transfer the loads applied to the façade system.
They compensate the tolerance of the substrate.
Available as fixed and sliding point anchors.
Absorption of thermal longitudinal expansion through slots on the sliding point anchor.

The Pi-wall holder of the subframe system ATK SystemOne made of aluminum is the basis for a façade subframe. It is fastened to the building substrate using fischer fixings. To reduce thermal bridges, thermostops made of hard-PVC can be attached to back of the wall holders. In order to enable all common insulation thicknesses and façade offsets, the wall holders are designed and manufactured in different projection lengths. To allow the thermal expansion of the profiles, the wall holders are used both as fixed and sliding points. The fixed point absorbs the entire dead loads of the façade panels and subframe system in addition to the proportional wind loads.

Properties

Aluminum (e. g. EN AW 6063, 6061)

Length ( L )	93 mm
Width ( W )	160 mm
Width ( W₂ )	50 mm
Height ( H )	60 mm
Thickness ( T )	3 mm
Dimensions ( d )	11x25 mm
Hole pattern	2x 11x25 mm
Hole pattern profile	2x 5.1x15 mm
Angle	90 °
System	—
Amount	75 pcs
GTIN (EAN-Code)	4006209489031

fischer wall holder SPH 93

As vantagens / Descrição do produto

Aplicação e aprovação

Instruções de montagem

Dados técnicos