fischer wall holder FPH 133

Name: fischer wall holder FPH 133
Brand: fischer

Productvarianten

Download of image data

Top Features

Pi-shaped wall holder for high loads.
Use as fix point.
Easy installation due to pre-drilled holes.

Thermostop CBS, BS

Wall holder as fixed point

Advantages

The wall holder is used to absorb and transfer the loads applied to the façade system.
They compensate the tolerance of the substrate.
Available as fixed and sliding point anchors.
Absorption of thermal longitudinal expansion through slots on the sliding point anchor.

The Pi-wall holder of the subframe system ATK SystemOne made of aluminum is the basis for a façade subframe. It is fastened to the building substrate using fischer fixings. To reduce thermal bridges, thermostops made of hard-PVC can be attached to back of the wall holders. In order to enable all common insulation thicknesses and façade offsets, the wall holders are designed and manufactured in different projection lengths. To allow the thermal expansion of the profiles, the wall holders are used both as fixed and sliding points. The fixed point absorbs the entire dead loads of the façade panels and subframe system in addition to the proportional wind loads.

Properties

Aluminum (e. g. EN AW 6063, 6061)

Length ( L )	133 mm
Width ( W )	160 mm
Width ( W₂ )	50 mm
Height ( H )	180 mm
Thickness ( T )	3 mm
Dimensions ( d )	11x25 mm
Hole pattern	6x 11x25 mm
Hole pattern profile	10x 5.1 mm
Angle	90 °
System	—
Amount	24 pcs
GTIN (EAN-Code)	4006209303672

fischer wall holder FPH 133

Productomschrijving

Toepassing en goedkeuring

Montage instructies

Technische gegevens