Product Picture
Application Picture
Application Picture
Application Picture
1   1

fischer Internal threaded sockets FIS E 15 x 85 M 10

The versatile fixing system with internal threaded sockets for masonry.

Art.-No. 43633
Top Features
  • Conventional metric screws and threaded rods can be used. This lowers costs and complexity.
  • Surface flush removal possible. Fixing points can be reused.
  • ETA approval for maximum safety.

Product Description

The fischer injection internal threaded anchor FIS E is made of zinc-plated steel and is the system component used for using fischer injection mortar in masonry. The internal threaded anchor is set manually by lightly rotating it. The injection mortar bonds the entire surface of the internal threaded anchor with the drill hole wall in solid brick. In hollow building materials the mortar is pressed through the grid on the anchor sleeve and bonds with the perforated brick with an interlock. This means that the load is directed into the building material. Use of the injection internal threaded anchor FIS E allows for surface-flush removal of the fixture.
Advantages
  • The internal threaded anchor FIS E is suitable for use with injection mortar in masonry or aerated concrete.
  • The internal threaded anchor FIS E allows for surface-flush removal and the reuse of the fixing point, and therefore offers the best possible flexibility.
  • The metric internal thread allows for the use of standard metric screws or threaded rods, which enables ideal adaptation in line with the intended use.
  • Please refer to the approvals for the mortar used.

Application and Permission

Applications
  • Removable and temporary fixings
  • Anchorings with the injection mortars FIS V, FIS VL, FIS P Plus, FIS P, and FIS Green in masonry and aerated concrete
Building materials
Approved for:
  • Solid sand-lime brick
  • Perforated sand-lime brick
  • Solid brick
  • Solid blocks made from lightweight concrete
  • Vertically perforated brick
  • Hollow blocks made from lightweight concrete
  • Building brick
  • Aerated concrete blocks
Also suitable for:
  • Solid and lightweight concrete blocks
  • Solid pumice and other solid building materials
* You can find detailed information on building materials in the registration document.

Permission

  • ETA-10/0383
  • ETA-15/0263
  • DoP 0195
For Details see corresponding Documents

Assembly Instruction

Functionality
  • The system can be used with any of the following injection mortars: FIS V, FIS VS, FIS VW. FIS VL or FIS P can be used but do not have approvals.
  • FIS E is suitable for pre-positioned installation.
  • The mortar bonds the entire surface of the anchor with the drill hole wall and seals the drill hole.
  • The anchor is set manually, by lightly rotating it until it reaches the drill hole base.
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture

Technical Data

Technical Data

ETA-approval
Drill diameter 18 [mm]
Packaging Folding box
Amount 10 [pcs.]
GTIN (EAN-Code) 4006209436332
Legend   =  Permission Available

Documents for Downloading

Additional Documents

Approvals

Title Type Created Valid Till
ETA - European Technical Assessment (PDF, 21 MB) European Technical Assessment fischer Injection resin FIS V for fixing in masonry ETA-10/0383 7/7/2020
ETA - European Technical Assessment (PDF, 7 MB) European Technical Assessment for fischer injection system FIS VL for use in masonry ETA-15/0263 7/7/2020
DOP - Declaration of Performance (PDF, 7 MB) DoP 0195 8/4/2020
sc93-delivery-2