The internal threaded anchor for masonry and aerated concrete

Internal threaded sockets FIS E

Name: Internal threaded sockets FIS E
Brand: fischer

The fischer internal threaded anchor FIS E is a system component for use with the fischer injection mortars FIS V, FIS VL, FIS P Plus, FIS P, and FIS Green for fixations in masonry made from solid brick, perforated brick, and aerated concrete. When the threaded anchor is installed, the mortar is pressed through the grating structure and creates a form fit with the structure of the brick. The metric internal thread enables the use of conventional metric screws or threaded rods. The internal threaded anchor is suitable for surface-flush removal, and the fixing point can be reused. This means that the FIS E is particularly suited to detachable and temporary fixings both inside and outside. The approvals of the various injection mortars must be observed.

Product variants

Download of image data

Product variants

Approvals / Test reports

5 Product variant (s)

Drill diameter

Thread

Packaging

Amount

GTIN (EAN-Code)

Legend = Permission Available— = Permission not Available

Viewed 5 of 5 variant (s)

Advantages

The internal threaded anchor FIS E is suitable for use with injection mortar in masonry or aerated concrete.
The internal threaded anchor FIS E allows for surface-flush removal and the reuse of the fixing point, and therefore offers the best possible flexibility.
The metric internal thread allows for the use of standard metric screws or threaded rods, which enables ideal adaptation in line with the intended use.
Please refer to the approvals for the mortar used.

Applications

Removable and temporary fixings
Anchorings with the injection mortars FIS V, FIS VL, FIS P Plus, FIS P, and FIS Green in masonry and aerated concrete

Building materials

Approved for:

Solid sand-lime brick
Perforated sand-lime brick
Solid brick
Solid blocks made from lightweight concrete
Vertically perforated brick
Hollow blocks made from lightweight concrete
Building brick
Aerated concrete blocks

Also suitable for:

Solid and lightweight concrete blocks
Solid pumice and other solid building materials

You can find detailed information on building materials in the registration document.

Approvals

ETA-10/0383
ETA-15/0263
ETA-20/0729
DoP No. 0189
DoP No. 0195
DoP No. 0354

Functionality

The system can be used with any of the following injection mortars: FIS V, FIS VS, FIS VW. FIS VL or FIS P can be used but do not have approvals.
FIS E is suitable for pre-positioned installation.
The mortar bonds the entire surface of the anchor with the drill hole wall and seals the drill hole.
The anchor is set manually, by lightly rotating it until it reaches the drill hole base.

Mounting Strip 1 Picture

1 / 7

ETA Certification Document

pdf, ETA-10/0383

European Technical Assessment for fischer Injection system FIS V for use in masonry - Metal injection anchors for use in masonry

Created on 07/07/2020

DOP - Declaration of Performance

pdf, DoP No. 0189

Declaration of Performance for fischer injection system FIS V (Metal injection anchors for use in masonry)

Created on 07/21/2019

ETA Certification Document

pdf, ETA-15/0263

European Technical Assessment fischer Injection system FIS VL for use in masonry - Injection system for use in masonry

Created on 07/07/2020

DOP - Declaration of Performance

pdf, DoP No. 0195

Declaration of Performance for fischer injection mortar FIS VL (Metal injection anchor for use in masonry)

Created on 08/04/2020

ETA Certification Document

pdf, ETA-20/0729

European Technical Assessment for injection System fischer FIS V Plus for masonry - Metal injection anchors for use in masonry

Created on 10/31/2023

DOP - Declaration of Performance

pdf, DoP No. 0354

Declaration of Performance for fischer injection system FIS V Plus (Metal injection anchors for use in masonry)

Created on 11/14/2023

Load Table

pdf,

Injection system FIS V, FIS VS and FIS VW with threaded rod FIS A - Highest permissible loads for a single anchor in solid brick masonry for pre-positioned or push-through installation. / Injection system FIS V, FIS VS and FIS VW with threaded rod FIS A5 and anchor sleeve FIS H..K. - Highest permissible loads for single anchor in solid brick masonry for pre-positioned installation. / Injection system FIS V, FIS VS and FIS VW with threaded rod FIS A resp. internal threaded socket FIS E - Highest permissible loads for single anchor in solid brick masonry for pre-positioned installation. / Injection system FIS V with threaded rod FIS A resp. internal threaded socket FIS E and anchor sleeve FIS H..K. - Highest permissible loads for single anchor in solid brick masonry for pre-positioned installation.

System components

Masonry drill bit Pointer M
4 variants

ETA-approval
Drill diameter ( d₀ )	14 mm
Thread ( M )	M6
Packaging	Folding box
Amount	10 pcs.
GTIN (EAN-Code)	4006209436318

ETA-approval
Drill diameter ( d₀ )	10 mm
Thread	—
Packaging	Blister card
Amount	4 pcs.
GTIN (EAN-Code)	4048962217773

ETA-approval
Drill diameter ( d₀ )	16 mm
Thread ( M )	M8
Packaging	Folding box
Amount	10 pcs.
GTIN (EAN-Code)	4006209436325

ETA-approval
Drill diameter ( d₀ )	16 mm
Thread ( M )	M10
Packaging	Folding box
Amount	10 pcs.
GTIN (EAN-Code)	4006209436332

ETA-approval
Drill diameter ( d₀ )	20 mm
Thread ( M )	M12
Packaging	Folding box
Amount	10 pcs.
GTIN (EAN-Code)	4006209436349

Internal threaded sockets FIS E

Product variants

The advantages / Product description

Application and approval

Assembly instruction

Documents for download