Product Category Picture
Application Picture
Application Picture
1   1

Heavy-duty anchor TA M

Heavy-duty internal threaded anchor with triple expansion sleeve geometry for low edge clearances

The fischer heavy-duty anchor TA M is an internal threaded anchor made from zinc-plated steel for pre-positioned installation. The heavy-duty anchor is ideal for anchoring fall protection devices, systems, and machines in non-cracked concrete. The optimised anchor geometry minimises setting energy and allows for use in really confined spaces. During the installation, the cone is pulled into the expansion sleeve and expands it against the drill hole wall. The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial clearances. The plastic cap protects the thread from soiling. This keeps the thread smooth.

Product Description

Advantages
  • The optimised geometry minimises setting energy and allows for use in extremely narrow spaces. This allows for user-friendly installation.
  • The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial spacing. Thus the TA M is extremely flexible.
  • The metric internal thread allows to use standard screws or threaded rods for the ideal adaptation to suit the intended use.
  • The red plastic cap protects against soiling and thus ensures free-running of the thread.

Available Product Variants


5 Product variant (s) found

5 Product variant (s) found

Variant
Drill diameter

d0

Anchor length

l

Thread

Ø x length

Contents
Art.-No. 062607

10 [mm]

49 [mm]

M 6 [mm]

4 x TA M6

Art.-No. 041504

12 [mm]

56 [mm]

[mm]

Art.-No. 062608

12 [mm]

56 [mm]

[mm]

4 x TA M8

Art.-No. 062920

15 [mm]

69 [mm]

M10 [mm]

Art.-No. 062921

18 [mm]

86 [mm]

M 12 [mm]

Viewed 5 of 5 products
0

Application and Permission

Applications
  • Steel constructions
  • Handrails
  • Consoles
  • Ladders
  • Cable trays
  • Machines
  • Staircases
  • Gates
  • Façades
  • Stand-off installations
Building materials
Approved for:
  • Concrete C20/25 to C50/60, non-cracked
Also suitable for:
  • Concrete C12/15
  • Natural stone with dense structure
* You can find detailed information on building materials in the registration document.
For Details see corresponding Documents

Assembly Instruction

Functionality
  • The TAM is suitable for pre-positioned installation.
  • When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall.
  • For correct installation, it must be ensured that the pre-positioned anchor TA M can be supported on the attachment, or that the threaded rod is countered.
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture

Documents for Downloading

Additional Documents

System Components & Related Categories

fe80::385c:a6b:f52e:7cbf%4