Nail anchor FNA II M6

The installation-friendly hammerset anchor for multiple fixings

The fischer nail anchor FNA II M6 with thread and flange nut is made from zinc-plated, stainless, and highly corrosion-resistant steel. The nail anchor is primarily suitable for the anchoring of ventilation systems and mounting rails. The European Technical Approval and classification as per fire resistance class R 120 ensure added safety. The FNA II M6 is set in a few hammer blows in a time-saving push-through and pre-positioned installation. Torque-controlled tightening is not required. This saves time. The FNA II expands automatically under load. The cone is pulled into the expansion clip and expands it against the drill hole.

Product Description

Advantages

Easy removal of fire protection board without damage
Reusability of fire protection board
Safe anchorage, particularly when exposed to vibration, wind, and pushing/pulling influences
Low anchoring depth (30 mm)
Convenient installation without torque-controlled setting tool
Approved system that has proven itself one million times over

Available Product Variants

Application and Permission

Applications

Fire protection plates
Fire protection boards
Ventilation systems
Wire and Nonius hangers
Mounting rails
Metal clamps
Substructures made of wood and metal

Building materials

Concrete C12/15 to C50/60, cracked and non-cracked
For multi-point fixings of non-load-bearing systems

* You can find detailed information on building materials in the registration document.

Permission

ETA-06/0175
2006-CVB-R0559
2006-Efectis-R0560
2006-Efectis-R0561

For Details see corresponding Documents

Assembly Instruction

Functionality

The washer significantly increases the pulling forces and, at the same time, prevents the damage of the panel during removal.
Removal by means of easy pinching off of nail head thanks to special 2-stage pliers.
For fast installation, use the compressed air setting device (item no. 093731).

Documents for Downloading

Additional Documents

Load Table (PDF, 85 KB)

Approvals

Title	Type	Created
ETA - European Technical Assessment (PDF, 1 MB) European Technical Assessment for fischer Nail anchor FNA II	ETA-06/0175	10/28/2016
Test report (fire protection) (PDF, 1 MB)	2006-CVB-R0559	11/1/2006
Test report (fire protection) (PDF, 1 MB)	2006-Efectis-R0560	11/1/2006
Test report (fire protection) (PDF, 2 MB)	2006-Efectis-R0561	11/1/2006