fischer Highbond anchor FHB II-A L M16 x 145/30 gvz

Name: fischer Highbond anchor FHB II-A L M16 x 145/30 gvz
Brand: fischer

Variante de produs

Download of image data

Top Features

Maximum load values due to large anchorage depth. This means fewer fixing points and smaller anchor plates are required.
Optimised anchor rod for the highest tensile loads.
Optimised for low axial and edge distances in cracked concrete.
No drill hole cleaning is required when using a resin capsule. This saves time.
ETA approval for cracked concrete.

Art.-Nr. 508002
FHB II-PF 16 x 145
Art.-Nr. 519125
FIS HB 360 S
Art.-Nr. 549956
Quattric II 18/200/250 S
Art.-Nr. 078181
BS ø16/18
Art.-Nr. 062420
RA-SDS

The best performance in cracked concrete for maximum tensile loads.

Advantages

The large anchorage depth of the anchor rod FHB II-A L allows the system to achieve maximum load values. Thus fewer fixing points and smaller anchor plates are required.
The cone shape of the FHB II-A L anchor rods has been specially optimised for high tensile loads. As a result, the best performance in cracked concrete is achieved.
The FHB II-A L anchor rod is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application.
No drill hole cleaning is required, if the FHB II-A L anchor rod is used in combination with the FHB II-P/-PF capsule. This saves precious installation time.
When using the FHB II-A L in combination with the injection mortar FIS HB, push-through installation with annular gap filling is possible without the use of any further tools.

The fischer Highbond rod anchor FHB II-A L is produced from zinc-plated steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that large machines and heavy steel constructions are securely installed within internal areas.

Applications

Façades
Staircases
Steel brackets
Machines
Silo installations
Masts
Rash protection
Steelwork constructions
Timber constructions

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked and non-cracked

Suitable for:

Concrete C12/15

Puteți găsi informații detaliate despre materialele de construcție în documentul de înregistrare

Aprobări

ETA-05/0164
DoP No. 0282
GS 3.2/16-352-1
(2103/12/12) - CM

Functionality

The FHB II-A L is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation.
When using FHB II-A L in push-through installation, the annular gap is to be filled with the injection mortar FIS HB.
The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole.
When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall.
The styrene-free vinyl ester mortar fully seals the drill hole.
When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art.-No. 62420.

Vezi instrucțiunile de asamblare ca PDF

Mounting Strip 1 Picture

1 / 9

Mounting Strip 2 Picture

1 / 5

ETA-approval
Drill diameter ( d₀ )	18 mm
Drill hole depth ( h₀ )	160 mm
Anchorage depth ( h_ef )	145 mm
Max. fixture thickness ( t_fix )	30 mm
Thread ( M )	M16
Width across nut	24 mm
Scale parts mortar	13
Packaging	Folding box
Amount	10 pcs
GTIN (EAN-Code)	4048962078237

fischer Highbond anchor FHB II-A L M16 x 145/30 gvz

Avantajele / Descrierea produsului

Aplicație și aprobare

Instrucțiuni de asamblare

Date tehnice

Documente pentru descărcare