Product Category Picture
Application Picture
Application Picture
Application Picture
1   1

Highbond anchor FHB II-A L Inject

The economical solution in cracked concrete

The Highbond anchor rod FHB II-AL Inject R is a system component of the fischer Highbond system FHB II Inject. The bonded anchor is ideal for standard fastenings in cracked concrete. With the FHB II AL Inject R for example guard rails and steel brackets are fixed outdoors. The conical anchor is set with the Highbond special mortar FIS HB.

Product Description

Advantages
  • The Highbond system FHB II Inject achieves high load values in cracked concrete.
  • The combination of injection mortar FIS HB and anchor rod FHB II-AL Inject R (long version) is ideally suited for serial installation outdoors.
  • The low drill hole depth minimizes the drilling effort, which saves time and ensures economical installation.
  • When using hollow drills with extraction, no drill hole cleaning is required.

Available Product Variants


8 Product variant (s) found

8 Product variant (s) found

Variant
ETA-approval
Drill diameter

d0

Anchorage depth

hef

Usable length

tfix

12 [mm]

95 [mm]

10 [mm]

12 [mm]

95 [mm]

20 [mm]

14 [mm]

100 [mm]

25 [mm]

14 [mm]

120 [mm]

25 [mm]

18 [mm]

125 [mm]

30 [mm]

18 [mm]

125 [mm]

60 [mm]

18 [mm]

160 [mm]

30 [mm]

18 [mm]

160 [mm]

60 [mm]

Legend = Permission Available = Permission not Available
Viewed 8 of 8 products
0

Application and Permission

Applications
  • Bridge railings
  • Façades
  • Staircases
  • Steel constructions
  • Masts
Building materials
Approved for:
  • Concrete C20/25 to C50/60, cracked and non-cracked
Also suitable for:
  • Concrete C12/15
* You can find detailed information on building materials in the registration document.

Permission

  • ETA-16/0637, ETAG 001-5
  • DoP No. 0084
  • DoP No. 0129
For Details see corresponding Documents

Assembly Instruction

Functionality
  • The FHB II-AL Inject is a bonded anchor with torque-controlled expansion for pre-positioned and push-trough installation.
  • For FHB II-AL Inject, the annular gap must be filled with Highbond special mortar FIS HB in case of push-through installation.
  • The anchor rod is set with the Highbond special motor FIS HB and is fully bonded in the drill hole.
  • When tightening the hexagon nut, the anchor rod cones are pulled in the motar shell, which expands against the drill hole wall.
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 2 Picture
Mounting Strip 2 Picture
Mounting Strip 2 Picture
Mounting Strip 2 Picture
Mounting Strip 2 Picture
Mounting Strip 2 Picture
Mounting Strip 2 Picture
Mounting Strip 2 Picture

Documents for Downloading

Additional Documents

Approvals

Title Type Created Valid Till
ETA - European Technical Assessment (PDF, 6 MB) European Technical Assessment for fischer Highbond-Anchor FHB II Inject - Torque controlled bonded anchor for use in concrete ETA-16/0637, ETAG 001-5 12/14/2017
DOP - Declaration of Performance (PDF, 2 MB) Declaration of Performance fischer Highbond-Anchor FHB II Inject, according European Technical Assessment ETA-16/0637 DoP No. 0084 1/31/2017
DOP - Declaration of Performance (PDF, 4 MB) DoP No. 0129 12/20/2017

System Components & Related Categories

fe80::86f:258e:f52e:7cbf%4