Art.-No. 536943

fischer Dynamic-Anchor FDA - A 12 x 100 / 25

Top Features

Approved for cracked concrete.
Absorption of dynamic alternating loads via optimum load distribution.

Pre-mounted threaded rod for fast and easy push-through installation

Advantages

Medium load level for a variety of applications.
Pre-assembled anchor rod for fast installation.
Assessed safety acc. to ETA.
Easy push-through installation leads to cost effectiveness – especially for serial installations.
Tight assortment with the size.
Less spacings and edge distances.
Drill holes are sealed.

The fischer Dynamic-Anchor FDA-A with prefitted threaded rod for quick installation. The steel anchor is suitable for push-through installation and small distances from the edge also allow fixing to the edge of panels. Tested security through general building regulations approval for innumerable load changes. The dynamic anchor can be glued completely to the drill hole wall using the injection mortar FIS HB. Thanks to the moderate load level, suitable for a large number of applications such as vehicle platform lifts, conveyor belts, industrial robots, cooperation robots and systems, as well as guide rails for elevators.

Functionality

The injection system suitable for tensile zones consists of the fischer dynamic anchor rod FDA-A dyn and the injection mortar FIS HB.
FDA is approved for push-through installation.
Extruding the mortar causes the two components to be mixed and activated in the static mixer.
The mortar bonds the entire surface of the anchor rod with the drill hole wall and seals the drill hole.
The centring sleeve centres the anchor in the fixture, thus ensuring a safe load application.
During the setting process, the injection mortar FIS HB fills the annular gap in the fixture, and ensures optimum load distribution. This allows for the absorption of dynamic alternating loads.

Mounting Strip 1 Picture

1 / 10