Art.-No. 531982

fischer TermoZ CS 8/210

The economic screw fixing for all thermal insulation boards in an external ETIC-system.

Advantages

Due to the steel compound screw of the TermoZ CS II, all facade insulations including the fire bar can be fastened securely.
The setting tool is used to countersink the anchor optimally, resulting in an even plaster layer without anchor marks.
Due to the special expansion zone of the anchor sleeve, the TermoZ CS II, is the first insulation anchor with an approval for hammer-drilled holes in vertically perforated bricks.
The plate design and sleeve labeling allow correct and intuitive application.
The closed plate does not allow dirt to be ejected and thus ensures a clean setting result.
The special geometry of the underhead plate reduces the necessary insertion torque for convenient and fast installation.

The fischer termoz CS is ideal for fixing pressure-resistant insulation up to 340 mm thick for thermal insulation systems such as polystyrene boards or mineral wool boards in concrete, solid and perforated brick, lightweight aggregate concrete and aerated concrete securely and with European Technical Assessment. The uniform setting depth for all building materials simplifies installation. The screw fixing comprises a grey plug sleeve with attached disc and a compound screw. The compound screw minimises the thermal bridge. This in turn prevents plug marks on the façade. The termoz CS 8 is set with a standard screwdriver. The compound screw is flush-mounted or countersunk as required. The countersunk installation is performed with the fischer setting tool CS.

Applications

Attachment of ETICS insulating boards on concrete and masonry
Flush installation in all conventional insulation materials
Flush installation of insulation materials such as polystyrene rigid foam panels and dense mineral wool panels
Fixing of ETICS insulating boards for new buildings and energetic building renovations

Building materials

Building material classes A, B, C, D, E
Concrete
Concrete (weather shell)
Building brick
Solid sand-lime brick
Hollow blocks made from lightweight concrete
Vertically perforated brick
Perforated sand-lime brick
Lightweight aggregate concrete
Aerated concrete

You can find detailed information on building materials in the registration document.

Approvals

ETA-14/0372

Functionality

The fixing is pushed through the insulation into the drill hole and is screwed in.
For countersunk mounting, the setting tool TermoZ CS is required.
Optionally, the setting tool TermoZ CS can also be used for flush installation by turning the stopping disc.
When using the setting tool, the installation is completed when the stopping disc is flush with the insulation panel.
For countersunk mounting the anchor plate needs to be covered with a closing cap.
For a surface-flush setting, a closing plug is not necessary.

Mounting Strip 1 Picture

1 / 5

Mounting Strip 2 Picture

1 / 6

ETA Certification Document

pdf, ETA-14/0372

European Technical Assessment for fischer TermoZ CS 8 and fischer TermoZ CS II 8 - Screwed-in plastic anchor for fixing of external thermal insulation composite systems with rendering in concrete, masonry, lightweight aggregate concrete and autoclaved aerated concrete

Created on 03/26/2021

Load Table

pdf,

TermoZ CS II - Permissible tension loads for a single anchor for multiple use for non-structural applications.

Marketing Documents

pdf,

TermoZ CS II. ETICS screw fixing.

ETA-approval
Drill diameter ( d₀ )	8 mm
Max. usable length at surface-flush installation ( t_fix )	170 mm
Max. usable length at countersunk installation ( t_fix )	170 mm
Drive	TX30
Packaging	Folding box
Amount	100 pcs.
GTIN (EAN-Code)	4048962213652

fischer TermoZ CS 8/210

The advantages / Product description

Application and approval

Assembly instruction

Technical data

Documents for download